Makita 9/16 in x 12-1/4 in Carbide SDS Plus Masonry Drill Bit

Description

Makita 9/16″ x 12¼” SDS-Plus Masonry Drill Bit Professional-grade carbide-tipped SDS-plus drill bit from Makita featuring a 9/16″ (15.0mm) diameter, 10-inch working length, 12¼-inch overall length, and a precision-ground carbide tip — designed for high-performance rotary hammer drilling through concrete, masonry, brick, and stone. Key Benefits Carbide-tipped for long service life SDS-plus shank for secure tool-free bit changes 9/16″ (15.0mm) diameter 10″ working length 12¼” overall length Optimised flute design for fast debris evacuation Compatible with all SDS-plus rotary hammers Professional grade construction Precise, clean bore in masonry applications Makita quality and reliability Technical Specifications Brand: Makita Part Number: D-00991 Bit Type: Carbide-tipped masonry drill bit Shank Type: SDS-plus Diameter: 9/16″ (15.0mm) Working Length: 10″ (250mm) Overall Length: 12¼” (310mm) Tip Material: Carbide Application: Concrete, masonry, brick, stone Compatible With: SDS-plus rotary hammer drills Features Precision-ground carbide tip for accurate penetration and extended wear resistance SDS-plus shank for quick, tool-free bit changes and positive drive engagement Optimised spiral flute geometry for efficient dust and debris removal during drilling Extended 12¼” overall length for deep reach applications 10″ working length for deep bore capacity Heat-treated steel body for durability under high-impact rotary hammer use Compatible with all major brand SDS-plus rotary hammers Perfect For Concrete drilling Block and brick masonry Stone and aggregate materials Anchor bolt and fixing installations Electrical and plumbing penetrations through concrete Construction and renovation work Industrial and commercial building applications General contractor and professional use Structural fixing and fastening Deep-reach drilling applications Key Features Carbide-Tipped: Precision-ground carbide tip delivers superior hardness and cutting performance in abrasive masonry materials SDS-Plus Shank: Industry-standard SDS-plus interface provides secure, tool-free bit insertion with positive torque transfer and axial movement for hammer action Extended Overall Length: 12¼” total length provides reach for deep-set anchors, penetrations through thick slabs, and structural applications 10″ Working Length: Maximum usable drilling depth suited to demanding construction applications Optimised Fluting: Spiral flute design channels debris away from the cutting zone efficiently, reducing heat build-up and maintaining drilling speed Makita Engineering: Manufactured to Makita’s professional tool standards for consistent performance and long bit life Application Instructions Ensure rotary hammer drill is set to hammer-drill mode for masonry applications Insert SDS-plus shank into the drill chuck until it clicks and locks securely Verify bit is seated correctly with no lateral play Mark drilling position and use a centre punch on hard materials where required Begin drilling at low speed to establish a starting point before increasing speed Apply steady, even pressure — allow the hammer action to do the work Withdraw the bit periodically to clear debris from the flutes and bore hole Use appropriate dust extraction or respiratory protection when drilling masonry Allow bit to cool between extended drilling operations Inspect carbide tip for wear or damage before each use — replace if chipped or dull

Key specifications

• Brand: Makita.; Part Number: D-00991.; Bit Type: Carbide-tipped masonry drill bit.; Shank Type: SDS-plus.; Diameter: 9/16 in (15.0mm).; Working Length: 10 in (250mm).; Overall Length: 12-1/4 in (310mm).; Tip Material: Carbide.; Application: Concrete, masonry, brick, stone.; Compatible With: SDS-plus rotary hammer drills.