Bituminous Black Paint

Description

TLA Coatings Bituminous Black Paint TLA Coatings Bituminous Black Paint – A specialized, high-quality protective coating formulated from asphaltic compounds (bitumen) to create a thick, durable, and flexible film. This paint is primarily used as a highly effective waterproofing and damp-proofing barrier. When applied, it forms a sealed layer that protects the substrate from moisture ingress, making it essential for below-ground and water-exposed applications. Key Benefits Superior Waterproofing: Forms an impermeable membrane that resists moisture penetration and dampness. Triple Substrate Protection: Effectively protects and adheres to Metal, Concrete, and Wood surfaces. Anti-Corrosion Barrier: Excellent for metal, providing a thick film that shields against rust and chemical attack. High Quality Coating: Manufactured for durability and long service life in harsh environments. Solvent-Based Adhesion: Ensures strong bonding and penetration, particularly on porous concrete. Technical Specifications Product Type: Bituminous / Asphaltic Black Paint Finish: Black, typically semi-gloss or low sheen Areas of Use: Exterior, Below-Grade, Industrial, Marine (Check specific TDS) Substrate: Metal, Concrete, Wood Spreading Rate: Varies heavily with porosity; low per coat on rough concrete. Thinning/Clean Up: Solvent Thinner (Mineral Spirits or Specialized Thinner) Grade: High Quality Protective Coating Perfect For Coating and sealing concrete foundations and retaining walls against ground moisture. Protecting metal surfaces (fences, tanks, agricultural equipment) from rust and weather. Applying to wood posts or sleepers that will be buried or exposed to high moisture. Waterproofing the exterior of concrete water tanks or planters. Industrial applications require a chemical and corrosion-resistant black coating. Application Instructions Preparation: Surfaces must be clean, dry, and free from loose rust, scale, dirt, grease, and oil. New concrete should be fully cured. Metal: Sandblast or wire brush rust. Apply a primer (if recommended by TDS) before the bituminous coat. Application: Stir thoroughly. Apply 2 coats by brush or roller. A thick, even coat is essential for the best waterproofing. Drying: Allow sufficient time between coats (check TDS—typically 4-24 hours depending on ventilation and temperature). Curing: Ensure the final coat is fully cured before backfilling or exposing to water. Clean Up: Clean brushes and tools immediately with the recommended solvent thinner.

Key specifications

• Product Type: Bituminous / Asphaltic Black Paint.; Finish: Black, typically semi-gloss or low sheen.; Areas of Use: Exterior, Below-Grade, Industrial, Marine (Check specific TDS).; Substrate: Metal, Concrete, Wood.; Spreading Rate: Varies heavily with porosity, low per coat on rough concrete.; Thinning/Clean Up: Solvent Thinner (Mineral Spirits or Specialized Thinner).; Grade: High Quality Protective Coating.