Micro Milling Premium 3600 Thin Set

Description

Premium 3600 Thin Set MSDS I – PRODUCT IDENTIFICATION MANUFACTURER: MICRO MILLING LIMITED Caxton Bay P.O. Box 4235, Plaisance Park Industrial Estate, Pointe-a-Pierre, Trinidad & Tobago, W.I. Telephone #: 1(868) 659-4060 Generic Identity: Latex Modified Portland Cement Based Thin Set Product Name: Micro Milling Premium 3600 Thin Set. _________________________________________________________________________________________________ II – INGREDIENTS & HAZARDOUS COMPONENTS Ingredient Name CAS Number Percent Exposure Limits Crystalline Silica 14808-60-7 40-55 0.05mg/m³ (ACGIH) Portland Cement 65997-15-1 35-45 10mg/m³ (ACGIH) Latex Polymer n/a 3-8 n/a OSHA PEL: Exposure to airborne crystalline silica shall not exceed an 8-hour time-weighted average (TWA) limit as stated in 29 CFR 1910.1000 Table Z-3, Air Contaminants, specifically: 10 mg/m3 %SiO2+2 _________________________________________________________________________________________________ III – PHYSICAL DATA Initial Boiling Point: N/A. Vapour Pressure: N/A. Vapour Density (Air=1.0): N/A. Specific Gravity: 2.2 -2.3. Percent Volatiles: 0.00% ________________________________________________________________________________________________ IV – FIRE AND EXPLOSION HAZARD DATA Flash Point: N/A. Explosive Limit (Product): N/A. Extinguishing Media: None to avoid. Special Fire Fighting Procedures: None. Unusual Fire & Explosion Hazards: None. _________________________________________________________________________________________________ 2 | Page _________________________________________________________________________________________________ V – HEALTH HAZARD DATA Eye Contact: Crystalline silica (quartz) may cause abrasion of the cornea. Skin Contact: Wet compound can dry the skin and cause caustic burns. Ingestion: No adverse effects expected for incidental ingestion. Inhalation: Air borne particulate matter may cause irritability of nasal passages, sneezing, FIRST AID: Eye Contact: Wash eyes immediately and repeatedly with water and seek prompt medical attention. Skin Contact: Wash exposed skin with soap and water immediately. Ingestion: If ingested, seek immediate medical attention. Drink water. Inhalation: No first aid is necessary since the adverse health effects associated with exposure to crystalline silica (quartz) result from chronic exposures. If there is a gross inhalation of crystalline silica (quartz), remove the person immediately to fresh air, give artificial respiration as needed, seek medical attention as needed. Chronic Effects: The adverse health effects – silicosis, lung cancer, scleroderma, tuberculosis, and nephrotoxicity – are chronic effects. CARCINOGENICITY: NTP – Yes IARC – Yes OSHA – Yes Crystalline Silica – IARC Group Agent 1 _________________________________________________________________________________________________ VI – REACTIVITY DATA Stability: Stable Incompatibility: (Materials to Avoid): Contact with powerful oxidizing agents such as fluorine, chlorine, tri-fluoride, and oxygen di-fluoride may cause fires. Hazardous Decomposition: None Hazardous Polymerisation: None Conditions to Avoid: Avoid contact with water or moisture during storage. Once packaging is opened contents should be used as quickly as possible. Close bags after use to prevent the absorption of moisture and/or contaminants. _________________________________________________________________________________________________ VII – SPILL OR LEAK PROCEDURES Steps to be taken in case material is released or spilled: Use Appropriate Respiratory Protection. Limit dust with water spray. Promptly clean by scoop or vacuum. Provide ventilation. If spilled when already mixed with water, contain by dyking with inert absorbent materials and place in an appropriate container for waste or disposal. Refer to State and Local Regulations for handling solid waste ____________________________________________________________________________ VIII – PROTECTIVE EQUIPMENT Ventilation: Open all available windows and entrances to ensure good ventilation Respirator Protection: Occupational Safety & Health approved respirator Protective Gloves: Leather or rubber gloves for skin and hands Eye Protection: Wear glasses or protective goggles to avoid splashed droplets. Always wash hands thoroughly with soap and water after handling product. ______________________________________________________________________________________________ IX – SPECIAL PRECAUTIONS Use only in applications as stated on the label. Do not take internally. Close container after each use. Avoid skin and eye contact. 3 | Page Ventilation with fresh air, including open doors and windows should be observed during any flooring installation. Operate HVAC systems at 100% fresh air intake before, during and after installation to eliminate lingering odors or particulate matter. The information accumulated herein is believed to be accurate but is not warranted to be, whether originating with the company or not. Recipients are advised t