Lath Tek-Point Screws

Description

Lath Tek-Point Self-Drilling Screws ½” to 1½” Lath Tek-Point Screws – Low Profile, Fast Self-Drilling Fasteners for Thin Metal Substrates These Lath Tek-Point Self-Drilling Screws are essential fasteners for efficiently working with light-gauge metal, available in common short lengths from 1/2 inch to 1 1/2 inches. The design is optimized for speed: the Self-Drilling (Tek) Point eliminates the need for pre-drilling through materials like metal lath, flashing, or light steel studs, significantly accelerating installation time. The screws feature a low-profile pan/wafer head (with a Phillips drive) that provides a wide bearing surface for a secure hold on thin material while ensuring minimal protrusion. The short length range is ideal for metal-to-metal overlap (stitching) and securely fastening metal lath to light-gauge steel framing. The plated steel finish ensures durability and protection against corrosion in interior and mild exterior environments. Key Benefits Self-Drilling Efficiency: Tek tip drills its own pilot hole through light-gauge metal, accelerating installation (no pre-drilling). Low Profile Head: Pan/Wafer head provides a wide, flat bearing surface for thin materials and minimizes protrusion for finishing. Ideal Lengths: Short range (1/2″ to 1 1/2″) is perfect for fastening lath, thin sheet metal, and small overlaps. Corrosion Resistance: Plated finish protects the steel from moisture and rust. Secure Hold: Fine/Medium threads provide excellent grip in thin metal and steel studs. Technical Specifications Product Type: Lath Tek-Point Screw / Stitch Screw Lengths Available: 1/2 inch to 1 1/2 inches Head Type: Low Profile Pan/Wafer Head (Phillips Drive) Thread Type: Fine/Medium Thread (Optimized for light-gauge steel) Point Type: Self-Drilling (Tek) Point Finish: Plated Steel (Dark Grey/Black Visible) Grade: Construction/Metal Fabrication Perfect For Securing metal lath or wire mesh to metal studs for plaster/stucco application. HVAC technicians assembling or repairing sheet metal ductwork and flashing. Stitching thin metal panels together (overlap connections) in roofing or siding. Securing metal trim or light fixtures to thin steel framing. Application Instructions Driving: Use a variable speed drill or screw gun with a Phillips driver bit. Setting: Drive the screw straight until the head is seated flush with the surface of the lath/metal. Do not over-drive and strip the threads, especially in thin steel. Safety: Wear safety glasses during installation, as the self-drilling tip produces metal shavings. Caution: Ensure the screw length is appropriate for the thickness of the material being joined, with minimal tip protrusion. Pro Tips Use a magnetic bit holder to simplify driving and prevent dropping small screws. For stitching thin metal, space screws closely together (e.g., every 2-3 inches) for maximum joint integrity. The Tek tip performs best when driven at a relatively high RPM. Ensure the driver bit is the correct size to prevent stripping the Phillips recess. ” Range) Lath Tek-Point Screws – Low Profile, Fast Self-Drilling Fasteners for Thin Metal Substrates These Lath Tek-Point Self-Drilling Screws are essential fasteners for efficiently working with light-gauge metal, available in common short lengths from 1/2 inch to 1 1/2 inches. The design is optimized for speed: the Self-Drilling (Tek) Point eliminates the need for pre-drilling through materials like metal lath, flashing, or light steel studs, significantly accelerating installation time. The screws feature a low-profile pan/wafer head (with a Phillips drive) that provides a wide bearing surface for a secure hold on thin material while ensuring minimal protrusion. The short length range is ideal for metal-to-metal overlap (stitching) and securely fastening metal lath to light-gauge steel framing. The plated steel finish ensures durability and protection against corrosion in interior and mild exterior environments. Key Benefits Self-Drilling Efficiency: Tek tip drills its own pilot hole through light-gauge metal, accelerating installation (no pre-drilling). Low Profile Head: Pan/Wafer head provides a wide, flat bearing surface for thin materials and minimizes protrusion for finishing. Ideal Lengths: Short range (1/2″ to 1 1/2″) is perfect for fastening lath, thin sheet metal, and small overlaps. Corrosion Resistance: Plated finish protects the steel from moisture and rust. Secure Hold: Fine/Medium threads provide excellent grip in thin metal and steel studs. Technical Specifications Part Number: (Implied Lath Screw Model) Product Type: Lath Tek-Point Screw / Stitch Screw Lengths Available: 1/2 inch to 1 1/2 inches Head Type: Low Profile Pan/Wafer Head (Phillips Drive) Thread Type: Fine/Medium Thread (Optimized for light-gauge steel) Point Type: Self-Drilling (Tek) Point Finish: Plated Steel (Dark Grey/Black Visible) Grade: Construction/Metal Fabrication Perfect For Securing metal lath or wire mesh to metal studs for plaster/stucco

Key specifications

• Product Type: Lath Tek-Point Screw / Stitch Screw.; Lengths Available: 1/2 inch to 1 1/2 inches.; Head Type: Low Profile Pan/Wafer Head (Phillips Drive).; Thread Type: Fine/Medium Thread (Optimized for light-gauge steel).; Point Type: Self-Drilling (Tek) Point.; Finish: Plated Steel (Dark Grey/Black Visible).; Grade: Construction/Metal Fabrication.; Available Length: 3/4 in TT$0.3
• 1/2 in TT$0.3
• 1 in TT$0.4
• 1-1/2 in TT$0.5.