3/4 in x 10 in Wedge Anchor

Description

3/4″ x 10″ Wedge Anchor 3/4″ x 10″ Wedge Anchor – Maximum Tensile Strength for Critical Concrete Fastening The 3/4″ x 10″ Wedge Anchor is a critical, high-performance structural fastener designed for load-bearing and critical applications in solid concrete. The impressive 3/4″ diameter and 10″ length ensure maximum embedment depth, achieving the highest possible tensile and shear load ratings. The core of its holding power lies in the wedge expansion mechanism: when the hex nut is tightened, the bolt pulls the tapered wedge clip up, forcing it to expand against the concrete wall of the pre-drilled hole. This creates a powerful, fixed anchor point. Constructed from durable zinc-plated steel, the anchor resists corrosion, providing a reliable, long-lasting solution for industrial and structural applications subjected to heavy tension and vibration. Key Benefits Maximum Load Capacity: 3/4″ diameter and 10″ depth provide extremely high tensile and shear strength for structural applications. High Embedment Depth: Long 10″ length ensures deep anchoring in thick concrete slabs or structural elements. Simple Through-Bolt Design: Allows the fixture to be installed directly over the anchor before tightening. Corrosion Resistance: Zinc-plated steel finish protects against rust and weathering. Immediate Full Load: Achieves full specified load capacity immediately upon tightening (unlike chemical anchors). Technical Specifications Product Type: Wedge Anchor / Through Bolt Anchor Size: 3/4 inch Diameter x 10 inches Length Material: Steel (Zinc Plated/Galvanized Finish) Mechanism: Wedge Expansion (Sleeve/Clip Type) End Type: Threaded with Hex Nut and Washer Application: Structural Concrete, Heavy Machinery, High-Load Grade: Industrial/Critical Heavy-Duty Perfect For Anchoring structural steel columns, base plates, and ledger boards to concrete. Securing vibrating or extremely heavy machinery and equipment. Installing heavy-duty rail systems, barriers, and industrial racking. Commercial and industrial construction requiring certified load ratings. Application Instructions Drilling: Drill a hole (same diameter as the anchor, 3/4″) into the concrete to the required depth using a hammer drill. Cleaning: Clean the hole thoroughly of all dust and debris. Installation: Drive the anchor through the fixture (pre-drilled hole) and fully into the concrete hole. Tightening: Turn the hex nut with a wrench. This pulls the bolt up, setting the wedge and expanding the sleeve securely inside the concrete. Checking: Tighten to the manufacturer’s recommended torque. Pro Tips CRITICAL: The holding power depends on a clean, properly sized hole; use a high-quality hammer drill bit and clean the hole thoroughly. Do not use in soft materials like block or hollow brick unless specifically rated for those substrates. Ensure the anchor is embedded to the recommended depth for full load capacity. Always use a torque wrench to ensure the anchor is tightened to the precise, required torque setting.

Key specifications

• Product Type: Wedge Anchor / Through Bolt Anchor.; Size: 3/4 inch Diameter x 10 inches Length.; Material: Steel (Zinc Plated/Galvanized Finish).; Mechanism: Wedge Expansion (Sleeve/Clip Type).; End Type: Threaded with Hex Nut and Washer.; Application: Structural Concrete, Heavy Machinery, High-Load.; Grade: Industrial/Critical Heavy-Duty.